How To Add A Second Drone To Dji Go App

100 Comments

Posted on Dec 22, 2016

DJI Go App: A Step-by-Pace Guide Through Every Menu & Button (Video & Written Tutorial)

In this written post and video tutorial I do a complete walk through of the DJI Go App.

I go over every unmarried card, setting and push button to assist you lot better understand this incredibly powerful yet complex app. Whether yous accept a DJI Mavic Pro, DJI Phantom, or a DJI Inspire, this tutorial is for y'all.

For example, exercise y'all know the answers to the following questions?

• Do you know how to change the sensitivity of your command sticks?
• Know how to set live video feed lagging issues?
• Are you taking advantage of the Configuration one, 2 and 3 settings?
• Do you know what IMU is and why it's an important setting to keep your center on?
• Why the 'EV' setting tin be helpful for setting exposure?
• Do you know what the 'Video Caption' setting does?
• Why should you 'Enable Hardware Decoding'?
• Are you taking reward of your C1 and C2 buttons?
• Exercise you know why 'Cache Map Information' is helpful for devices that have no prison cell service?

Down below I talk almost the respond to each i of these questions so many more.

After making your way through this post I guarantee y'all'll learn something and experience more than confident as a drone pilot!

So selection your preference of either watching the video tutorial or the written post.

Quick note though…considering the DJI Go App is so packed with settings and features, both the video and post are very long…you have been warned ;)

---

What is the DJI Go App?

The DJI Get app let'due south you connect a smart device like a tablet or phone to a DJI Mavic Pro,DJI Phantom, or aDJI Inspire'southward remote controller so that you can get so much more than out of your flying experience.

One time you connect the app you can then meet what your drone'due south camera is seeing, tweak camera settings, review imagery you've captured, adjust control movements to your preference, engage Intelligent Flight modes and so much more.

I've created this tutorial using a DJI Phantom 4 so if you lot have another DJI drone, or a different app version some menus and settings might await slightly unlike but balance bodacious the main features, functions and concepts are the same.

So let's get started!

i) AIRCRAFT STATUS

This menu provides an overview of how everything is working on the drone. To enter into this menu, click on Prepare to Go at the tiptop of the screen.

If you lot run into that your settings say "Normal" and you don't run across anything that is colored red, then that likely means the drone is functioning properly and is prepare to fly.

Compass

One very important setting you want to check is theCompasssince it is responsible for letting the drone know where information technology is in the world.

It's widely recommended that yous always calibrate the drone'due south compass at any new flight location.

This is because the compass is very sensitive to electromagnetic interference, which tin can lead to compass data bug that will probable upshot in poor flying performance or even flying failure.

Therefore regularly calibrating your drone's compass when you lot fly in new locations will help maintain optimal operation.

To do aCompass Scale click on Calibrate and follow the on-screen instructions.

Check out the following link to see a video of how I calibrate the drone'due south compass (it's at the kickoff of the tutorial).

Important notes regarding calibrating the compass:

• Don't calibrate the compass near any strong magnetic interference from sources such a magnetite, parking structures, and subterranean metal structures.
• Don't calibrate the compass in nigh any large metal objects.
• Don't calibrate the compass indoors.

Remote Controller Style

I takemy controller fix to Manner 2 which ways the left stick controls throttle and yaw, and the right stick controls tilt and motion.

For more than info on how the sticks/remote controller settings work check out my tutorialHow to Fly a Drone: The Ultimate Guide

Mode 2 is the well-nigh popular controller configuration outside of Asia and how near people in the states larn how to fly a drone.

Once you set your controller manner you lot don't have to worry nearly it since the drone volition think the setting for hereafter flights.

---

2) MAIN CONTROLLER SETTINGS

This is where y'all'll find the settings for marking the Home Point, enabling multiple flights modes, turning beginner mode on/off and setting max altitude & distance.

Home Point

Abode Point setting with the arrow = this sets the electric current position of the drone equally the home point.

Abode Point setting with the petty guy = this sets the dwelling house point to the location of the controller.

This is handy if you are decision-making the drone from a moving object like a boat or automobile.

Multiple Flight Modes

Positioning mode (P-MODE)
This fashion means all the drone'south sensors are enable which volition consequence in a more than sticky just stable flying.

So when you lot let go of the sticks the drone volition automatically restriction, then hover and stay in place thanks to GPS.

Attitude or ATTI mode (A-MODE)
In A-Manner manner the drone's sensors are disabled which will result in a more squirrely flying because wind and air currents can move around the drone.

Basically put, in that location is no "automatic brake" to finish your drone and then y'all take to motion the sticks in the reverse direction to stop it.

Many experienced pilots like to movie in ATTI mode then they that tin get the smoothest movements possible since machine braking is disabled.

Sport way (S-Mode)
In S-Mode you lot unleash the full potential of your drone which allows you to become full speed while nevertheless assuasive your aircraft to connect to GPS satellites.

Keep in mind the obstacle avoidance technology is disabled in this style.

Return to Home Altitude

This is an important setting considering if the drone gets disconnected with the controller then you have control over how it will answer altitude wise.

I take mine ready to 60 meters, which is about 200ft. I practise this because that altitude is well to a higher place any copse or buildings in the areas where I usually fly.

But be sure to gear up this distance to something that is much higher than whatever surrounding obstacles in the surface area.

Beginner Fashion

This mode is great if you are new to flying. Basically information technology disables many of the advanced features and and then it automatically sets an altitude, distance and speed limit on your drone then if y'all are flying in a big broad open up space at that place isn't much to think well-nigh.

This as well is a great mode to practice in considering you can work your way up to the more avant-garde settings the more comfortable you get with flying.

Max Flight Altitude

This determines how high your drone can get. To follow the rules here in the U.S. I have mine set to 120 meters, which is about 400ft.

Click here to read more than about the drone rules.

Max Altitude

This setting determines how far your drone tin become from the remote controller.

Yous can set this to a ridiculous amount like a few miles but again here in the U.Due south. the FAA's rules land that you must keep your drone inside line-of-sight, which means you need to exist able to run across it.

Advanced Settings

The options in this menu basically allow you to fine melody how the drone moves. This can effect in smoother pan and yaw movements.

The best illustration for this is to call back almost how someone plays a musical instrument like a guitar. The adjustments made in these menus allow you to "melody" your drone (guitar) depending on how you like to wing (play).

Gain & Expo Tuning

This determines how fast the stick inputs are translated into movement on the drone. Entering in a slower value will then mean you lot need to move the sticks even more than before the drone will react.

Proceeds & Expo Tuning: EXP
EXP stands for Exponential Curve and information technology allows you to ease into controller movements.

Stay tuned for a total tutorial on EXP settings! To be notified of when it is released, sign upward for mydrone newsletter!

Proceeds & Expo Tuning: Sensitivity
The section determines how sensitive your controls will be

Mental attitude = How quick your drone volition react and level out.

Brake = How quick your drone will stop in GPS mode. A lower value means a slower and smoother brake.

Yaw Point End = The maximum stick input for yawing. A lower value means a slower yaw.

Gain & Expo Tuning: Gain
This menu determines how the drone will react to external forces such equally air pressure and wind.

Tweaking these settings will modify the flight dynamics, which may result in undesired oscillation and/or wobble.

These settings are for advanced flyers that normally come from the globe of building their ain uav's where tweaking these settings is necessary.

So you lot probably don't want to modify these settings unless yous understand them.

More than helpful info on this entire menu can be plant here.

Sensors: IMU (Inertial Measurement Unit)

This system includes the 3-centrality accelerometer, a iii-axis athwart velocity and a barometric altimeter which all work together to help keep the drone in information technology'south current position when flight.

If you have issues with weird flying, drifting or point and compass errors and so try fixing the effect past going through an IMU Scale.

Simply brand sure yous are on a level surface and you don't motility the drone or have it on a table can exist bumped.

Sensors >Compass

This setting checks for compass problems or interference problems. This is besides where you tin calibrate the compass.

RC Signal Lost

This is ane of the fail safes that is built into the drone and so that if the controller gets disconnected from the drone the aircarft can either:

• Return-to-Dwelling house which ways the drone will wing dorsum to the dwelling point
• Hover in identify
• Automatically land correct where it is at

I have mine set to fly back to the home point so that information technology comes back right to the spot I took off from.

Be mindful that bespeak loss tin happen for various reasons like when the drone flies too far, the controller loses power or the betoken is blocked.

This is why I e'er make sure my home betoken is accurately ready before takeoff.

Smart Return Home:

This handy feature allow's you know when you should think nearly bringing the drone back home based on the remaining battery life.

The status bar for this is found on the main screen. Information technology'southward that green, xanthous and ruby-red bar that runs the width of the screen found most the summit of the screen.

The further the drone gets from its abode point, the more the bar will move to the left in the yellowish and red zone.

Hot tip: exist mindful of flying against the wind as that will crave more than battery ability and yous don't want to wait until the last infinitesimal to bring your drone back.

Turn on Front LEDs

This option lets y'all turn off the front end cherry LED lights.

This can be helpful if you are flight in depression lite since the red lights can easily enter the camera'due south frame.

---

3) VISUAL NAGIVATION SETTINGS

This is where you brand changes to the settings that keep your drone airborne.

Enable Visual Sensing System

This will turn on the obstruction avoidance sensors to help prevent your drone from hitting whatsoever objects that the sensors detect in the drone's path.

Hot tip: The obstacle sensors stop working later you lot hit a speed of 22mph (35kph).

Enable Vision Positioning

This helps keep the drone steady when GPS signals are weak or when you're flying indoors.

Active Track: Enable Backwards Flying

This will let y'all're drone automatically fly backwards in the Active track intelligent manner if you're bailiwick reverses directions.

I recommend you lot merely enable this setting if you are flight loftier or if you have the newest DJI Phantom 4 Pro since it has obstacle abstention sensors in the back of the drone.

Advanced Vision Sensors

This gives you a status update of the navigation sensors. They should all read equally "Normal".

---

4) REMOTE CONTROLLER SETTINGS

This is where you brand changes to the controller settings.

Gimbal Cycle Speed

This just depends how sensitive you want the physical gimbal control wheel to exist.

This is located on the top left mitt side of the remote controller.

Remote Controller Scale

If you're having remote controller issues try calibrating information technology with this setting. Only know the drone will have to be off in lodge to do this.

Stick Style

This changes the way the sticks control the drone. Again I have mine ready to Mode 2 which is the nigh popular mode outside of Asia.

Button Customization

This is a super handy setting. Under this menu you can assign a control to the Custom 1 and Custom ii buttons without having to dive deep into the menu.

I take my buttons ready to:

• C1 = camera forrard/down
• C2 = advanced video settings

Linking Remote Controller

If your remote gets disconnected from your drone for some reason or you buy a replacement controller this is the carte du jour where y'all tin can connect them together.

---

five) Paradigm Transmission SETTINGS

This menu determines the quality and range of your live feed transmission.

Most of the time I get out mine on Auto manner only if you have a choppy live video indicate you can try changing the settings hither using the Custom button.

Select Channel
Selecting a unlike channel mode may improve your live feed results, merely expect at how stable/unstable each aqueduct is and chose one accordingly.

Transmission Quality
This determines how crisp and clear the image is going to be.

Be mindful though that the higher you push the quality of the image, the lower in distance the signal will travel.

---

vi) AIRCRAFT BATTERY

This where you lot tin go info related to your battery such every bit the free energy per charge, temperature, the remaining ability as seen in milliamps hours.

Y'all can also see the flight fourth dimension of the bombardment, how many times you've charged information technology and y'all tin can see the capacity of the battery which decreases the more than you use and charge it.

Critically low and low battery warnings

These are super helpful settings because they will requite yous warnings when your battery is getting depression.

I like having my ready to ten% and 30%.

Avant-garde setting > Time to discharge

Since these are smart batteries, you can have them set to automatically brainstorm the discharge procedure.

This will help improve the life of the battery when you are not using them. I have my discharge time set to 3 days.

---

7) GIMBAL SETTINGS

This menu let's y'all control how the photographic camera'due south gimbal will role.

Gimbal Mode

Yous have 2 options:

• Follow = This mode means the camera will always be stable and maintain the horizon. This is the setting I personally use.
• FPV (First Person View) = This is handy if yous want to orient yourself with the movement of the drone. So when the drone tilts to the side, so volition the camera. This can requite yous the feeling that yous are flight.

Advanced Settings

This menu allows you to prepare up 3 different configurations for how you want the gimbal to function.

I highly recommend y'all play with each setting to fully sympathise how they work.

Essentially I like to have a setting motility fast, normal and tedious:

• Configuration i = I set up mine to the default movement speed.

• Configuration 2 = I gear up mine so the gimbal has a fast motion speed. I primarily utilise this setting when I am shooting stills so I tin whip the camera into place without missing any magical moments.

• Configuration 3 = I set mine then the gimbal has a slower motion speed. I like to utilize them when I am filming so that my pans are silky shine.

Centering Camera

This push will pop the photographic camera into place horizontally or straight down.

If you remember I setup a shortcut for this feature using the Custom Buttons, which are plant nether the Configuration Menu.

Enable Up Gimbal Tilt Limit

Switching this on will allow the camera to tilt up beyond the 30˚ limit. Keep in mind that you will run across the propellers in your shots though.

Adjust Gimbal Roll

This allows you to right the tilt of the gimbal if something is off.

This is handy if you need to temporary gear up the orientation of your gimbal if you are out flight since y'all can set up it remotely without having to bring the drone dorsum for a landing.

Gimbal Car Calibration

Utilize this setting if you take whatever issues with the gimbal being crooked or the motor is constantly running.

Just note you lot cannot perform this while the drone is in the air because you have to accept it on a level surface.

I normally perform a gimbal scale if I am transporting my drone over long distances since there is a chance something got off due to all the banging around.

---

viii) …General SETTINGS

This section provide various setting options for enshroud, alive streaming and info near the drone.

Enable Hardware Decoding

If you lot have lag issues and freezing issues with the live video feed try turning this on because it can help with the image transmission.

Basically this helps with the processing power that is required to decode the live video feed.

So if y'all are using an older or slow smart device turn this on because it can also assist reduce overheating on the device since it wont have to work as hard to decode the live video feed that's coming in from the drone.

Select Live Broadcast Platform

This is where yous can share a live video stream of what your drone's photographic camera is seeing straight to Facebook, WeiBo or YouTube.

Cache Map in Background

This is super handy! If you don't accept a smart device that can connected to the internet when yous are out flying and then turn this option on and load upward your map information using WiFi before you leave domicile.

The DJI Go app will then save the map data and then when you become to the location you are flying at you lot tin can see all the map infomation.

GEO System

This gives yous helpful data on flight regulations and restrictions in the surface area.

General Settings > Video Enshroud

The settings here will make up one's mind how buried files are handled.

The DJI Go app saves depression resolution photos and videos (proxy files) inside the app so you tin can apace review the imagery that you capture.

This of form takes up space on your smart device and then you want to properly manage the settings.

Cache During Video Shooting

If you are experiencing lagging live feed bug or yous have an older smart device or a device that doesn't have a lot of costless space on it, then attempt turning off this off to improve results.

Largest Video Cache Capacity

Gear up this based on how much free space you can dedicate to the storage of proxy files inside the DJI Go app.

I get out my video cache chapters set to 2GB.

Clear Cache Automatically

Leaving this checked will permit the DJI Go App to clear out the cache when you pass the limit you set up in the setting to a higher place.

Flying Log

Includes information about all your flights

Other

This is where you tin can proper noun your device and detect out the model and serial numbers on the shipping.

---

ix) RIGHT SIDE OF THE SCREEN

This area contains all the settings for adjusting how your imagery will look and what format it will be recorded in.

Gimbal Indicator
This line runs top to bottom and gives yous an idea of how much more than your camera tin can point down or upwards.

Video/Photo Switch
Switches the camera mode between Photo and Video.

Photographic camera Shutter/Record Button
Takes a picture in photograph mode or get-go/stops recording when in video mode.

Play button
Let's you review the imagery you've captured.

Quick Menu
Adjust the photographic camera settings.

Automobile Mode
This is a smashing mode for beginners because the camera will automatically set the ISO and shutter (and aperture on some drones) for you.

Manual Mode
A more than advanced mode that requires you to set the ISO, shutter (and discontinuity on some drones).

ISO
This setting adjusts the camera's sensitivity to light.

The higher the ISO number the more sensitive the camera is to light. But this also means you'll have more noise/grain in your image.

Shutter Speed
The amount of fourth dimension your camera's shutter is open up, which tin freeze movement or suggest motion.

Aperture
This controls the amount of light traveling through the lens and how blurry your foreground and background are going to be.

This choice is usually but establish on college-end drone cameras.

EV (exposure compensation value)
When you are in manual manner you tin can run into how far you are from the car setting recommendation.

I find this to be helpful when I am trying to figure out what my settings should exist when I am in manual fashion.

Video Setting Style (toggle must be switched to video mode to see these settings)

Video Size
This is where you adjust the image size and frame rate you wish to record.

Video Format
This determines which video container format your videos will record in.

I personally use .MOV just because Apple developed this format and I use Apple tree products.

If you lot're really curious learn more about the subtle differences between MOV and MP4 here.

NTSC/PAL
This is the where yous select which brandish system format you lot desire.

• PAL is the most common format used in Europe and parts of Asia.
• NTSC is the well-nigh common format used in most of the Americas and Canada.

Acquire more about the differences between PAL and NSTC hither.

White Residual
This has to practice with the colorcast of your imagery and if set up properly yous can correct shades of yellow, blood-red or blue.

This is what makes your imagery look natural, more warm (orange-ish) or more absurd (blue-ish).

Ideally, y'all desire whites to appear white, then you adapt the white balance to help the camera effigy that out.

Just use 1 of the presets like Sunny, Cloudy, etc… and match it to the weather/lighting atmospheric condition yous are flight in.

Mode
This is where you tin can adjust the sharpness, contrast and saturation of the imagery you are capturing.

If you do any mail service-product editing on your computer then it is highly recommended that you shoot your imagery with apartment settings.

For more on this check out this post on drone video tips or drone photography tips.

Color
This determines how your camera will process and render its imagery.

I have mine set to D-Log or None when in the Video Mode (it just depends on the shooting scenario) and I accept it set to None in when in Picture show Style.

This is because I like my original media to exist "apartment" or "unedited" since practise my editing on the computer.

Photograph Setting Style (toggle must be switched to photograph way to encounter these settings)

Photo

Single Shot = snaps one picture at a time

HDR Shot (Loftier Dynamic Range)

HDR images are created when the camera takes two or more than photos with different exposure settings and so merges them together.

An HDR paradigm will requite you a photo with more information in the highlights (so the white pixels aren't blown out) and more information in the shadows (and then the dark pixels aren't crushed besides much).

This is known every bit having a wide dynamic range and can result in a punchier, more dynamic JPEG image.

If yous ain post-editing software and then I highly recommend you attempt the AEB selection discussed below for creating HDR images, instead of this selection because the results in my opinion are much amend.

Multiple

This will take a series of images dorsum to dorsum and tin be helpful if you are trying to capture a specific action and don't want to miss it.

AEB (Automatic Exposure Bracketing)

This setting is similar to the HDR setting above simply it gives you lot more control over your final HDR image.

AEB is helpful when you desire to create a photograph that has a lot of variation in the scene between the vivid and dark areas.

With AEB enabled the photographic camera volition cull an exposure then take a picture, then it volition immediately take ane shot that is a petty overexposed and that is a little underexposed.

You'll then be left with iii RAW images of the same scene that you can load into either Photoshop or Lightroom and combine them together into a single HDR epitome.

This is my favorite way to create HDR images.

Timed Shot

This style allows yous to shoot with a timed delay, which could exist helpful if you are trying to take a selfie and need time to put the controller down or come across place.

Prototype Size

This is the attribute ratio for capturing photos. I keep mine prepare to the default 4:3 setting.

Epitome Format

RAW is considered a lossless format considering the files are uncompressed.

This ways that you'll get every bit of the photograph'southward image data with piddling to no processing correct from the photographic camera's sensor.

This then gives you lots of room to play with in mail similar when it comes to editing and you lot desire to rescue or restore detail in the highlights and shadows.

It's important to notation that RAW files are much bigger than JPEG files and they can take a petty bit longer to write to the retention card.

That is why I highly recommend you don't get the cheapest retention cards and instead get ane with fast read/write speeds. I own 5 of these cards and absolutely love them.

RAW is the setting I shooting in.

JPEG

On the flipside, JPEGs are considered a finishing format because the files are much smaller and compressed.

This ways that they have already lost information related to the epitome so you lot will take little wiggle room to do any serious editing or detail recovery.

JPEG + RAW

This mode will permit you lot capture your images in both the RAW and JPEG format.

The advantage to this is y'all can take large original RAW files and smaller JPEG files.

Just note when shooting in this way, you lot'll take up more room on your retentivity card and it volition take a chip longer to write the image to the bill of fare since it is recording 2 different files at once.

Photographic camera SETTINGS (gear icon)

Histogram
This is graph shows the overall brightness of a scene. Y'all can read more than about it what a histogram is here.

Over Exposure Warning
This will overlay "Zebra Lines" onto of your image which lets you lot know where your image is over exposed and where the pixel data is completely lost.

Zebra lines tin can help you lot go a properly exposed epitome considering you lot just prepare the cameras settings until you don't run into a lot of Zebra Lines.

This works best when you lot are out doors and you tin can't fully run into your screen due to the glare and it existence as well bright exterior.

Note: the zebra lines merely provide yous with a frame of reference and volition not be recorded onto the images you capture.

3D noise Reduction
This option helps reduce the amount of noise when shooting. Information technology tin exist helpful in low light situations.

Even so, some people written report that information technology can create pinch artifacts into images when used in bright settings and then experiment with this setting to go the all-time results.

Video caption
This setting volition store flight data and synchronize it with the video equally a subtitle file.

So if you play your video with a player that supports this feature you lot can get the information of your flight automatically overlaid on the epitome.

Anti-Flicker
This setting should match the broadcast frequency of the country y'all volition be displaying your videos in (NSTC or PAL).

I'm based in the USA (NTSC) and then that ways mine is set to lx Hertz. If you're using PAL this should read 50 Hertz.

File Alphabetize
This refers to how the files will exist numbered on your memory card. I utilize Reset simply this is really just a personal organizational preference.

• Reset: Use this setting if y'all want the memory card to start counting images at 1 after its been formatted.
• Continuous: Use this setting if you desire the number to keep going forever even if you insert a new memory card in.

This might be helpful if you are trying to keep track of imagery for a project.

Grid
This will overlay grid lines on superlative of your alive feed to help you with composing your imagery for capture.

Notation: the lines volition not be recorded onto the images.

Format SD Bill of fare
This will completely erase your retentiveness carte. I similar to perform a reformat on my card before every shoot, after of class I've backed up my images from the previous shoot.

Reset Camera Settings
This will put all the camera settings dorsum to their default land.

---

10) LEFT SIDE OF MAIN SCREEN

Machine Takeoff

This button will automatically launch your drone 4ft up in the air where it will then hover in place.

Go Domicile (machine land)

This button will automatically bring your drone back to its Home Point and land.

DJI's Intelligent Flying Modes

This is where you have admission to DJI intelligent flight modes which offer various smart flying features that utilize impressive artificial intelligence technology.

Check out a video that shows a few of the DJI Intelligent Flying Modes in activeness.

Active Track
In this setting your drone volition automatically recognize subjects like people, bikes, cars or boats and so follow them.

This can be helpful since it allows you to focus on controlling just the camera, not piloting the drone.

Tap Fly
All you have to practice is tap a betoken on your screen and the drone will automatically wing along that road, allowing you to focus on controlling just the camera.

Point of Involvement
This is where yous can ready a specific building, object or location as the Point of Interest and the shipping volition continuously circumvolve or orbit around it.

Way Points
Here y'all can set multiple GPS points, or Waypoints, and the aircraft will automatically fly to them while you focus on controlling the camera.

Follow Me Mode
In Follow Me mode, the shipping will automatically follow yous.

Domicile Lock
This setting fixes your controls to be relative to the Home Bespeak.

This allows y'all to easily pull back on the control stick to bring the aircraft back home, or push button forwards to fly farther away, no affair which mode it is facing.

This is a super handy feature if you loose sight of your drone and desire to bring it back closer to you.

Course Lock
In this mode the drone will only fly in a straight line (or grade) even if the orientation of the nose (the front of the drone) is facing a unlike direction.

Past activating Course Lock, the controls will be gear up to be relative to your aircraft's current path.

This easy navigation allows you to fly the drone in direct lines while you command the camera.

---

11) MAP DIALOGUE

Click the box on the bottom right hand side of the screen to make the map become full screen.

Alarm Space Setting

This is the dialogue box where you can select what warnings you wanted displayed for the various Airspace Classes, nearby airports, heliports, etc…

Center Map

This will center the map and testify you where your drone and controller's position is.

Compass Icon

This will orient the map so that n is facing upward on the screen.

Map Viewing Modes

Here you have 3 viewing options for how the map will exist displayed.

• Standard = Shows you an illustrative map with names of streets, highways, etc…
• Satellite = Will show y'all merely a movie of the surrounding surface area with no street or highway names.
• Hybrid = Will show you lot a blend of the two. You lot volition have street and highway names overlaid on height of the satellite view.This is the one I personally use.

---

eleven) TELEMETRY

Telemetry is a two-way data stream that sends data about your shipping'south flying downward to the brandish/controller.

This information is located along the bottom left-hand side row of the screen.

D = your controller'south distance from the aircraft

H = Show yous the peak based off the takeoff betoken

H.Southward. = This displays the horizontal speed of the drone

Five.South. = This displays the vertical speed of the drone which is how fast or wearisome your aircraft is climbing and ascending

VPS = This is the distance to the ground based on the little cameras and sonar sensors underneath the drone. This is nigh helpful when your drone isn't connected to GPS satellites.

Radar display =This shows you which way your drone is facing in relation to North.

Why is the radar display helpful? Because if you lose sight of your drone yet y'all know which way northward is, yous can have a better idea of which management you need to point the stick in order to bring information technology back.

Conclusion

Are y'all still with me?! ;) Man, that was a doozy and probably the longest mail service I've written still.

Merely I sure promise it was helpful to you and that y'all feel like you have a improve agreement of what all the menus and buttons practise inside of the DJI Go app.

If I missed something or if you need something explained even more than in-depth so please leave a comment downwards below and I volition help you out!

 …if you enjoyed this mail could you delight exercise me a HUGE favor?

Lastly, if yous enjoyed this mail service could you please practice me a HUGE favor and requite it a thumbs up and share it on social media for me? Just click the big social media icons at the very summit or very bottom of this page.

This blog is simply a hobby and labor of love and your support truly does help in keeping this website going!

Thanks so much!

Accept a question or comment? Feel complimentary to contact me directly at [email protected] or just drop a comment downwards below.

About this site

Dirk Dallas, likewise known online as@dirka, is the founder and curator ofFrom Where I Drone, a blog dedicated to inspiring and didactics drone pilots how to capture amend aerial photos and videos.

Category: Tips & Tutorials Tags: aircraft battery menu, aircraft status, Cache Map Information, camera settings, compass scale, definitions, dji drone guide, dji go app, Dji settings, drone, Enable Hardware Decoding, ev, general settings menu, gimbal settings menu, guide, how to, prototype transmission settings, imu, intelligent navigation menu, main controller settings, rc control settings carte, simple dji go app guide, telemetry, tips, tutorial, video, visual navigation, what is

How To Add A Second Drone To Dji Go App,

Source: http://fromwhereidrone.com/dji-go-app-step-step-guide-every-menu-button/

Posted by: mizerruchoculd1984.blogspot.com

Share this post